Value Pack Kit for Cars – FORD
- Additional information
- Reviews (0)
- How to Use
Value Pack Kit for Cars
If you have scratches on your car and wish to remove those, you have selected the right product. Our Value pack Kit, contains all the things you require to touchup those annoying car scratches and will give you a perfect finish.
The Paint Can in the kit is computerised color matched to the Car colors available in the above list of colors and there should be no problem for you to get a perfect matching finish. There are instances, where the color might not look matching to you, but once you maintain the right distance of spraying and slowly build up coats, you will be able to EXACTLY MATCH the color by your spraying technique.
The Shade in Com-Paint is generally kept on a lighter tone so that as you coat your vehicle you can achive the darkness in shade with your coat builtup.
Don’t forget to see our DEMO VIDEOS for a better understanding of the whole process of Touchup.
- Quickly Dries
- Smooth and Fine Finish
- Can be used on other metal surfaces
- No additional/external equipment/ product required for application.
- Available in standard shades of various Car Brands and Models.
- Can of Com-Paint Value Pack Kit of Selected Color (120 gm)
- Can of Com-Merge, Finishing Solvent Spray (120 gm)
- Tube of Com-Cut (50 gm)
- Tube of Com-Fill (50 gm)
- Com-Paint Metal Applicator
- Com-Paint Emery Pads of 400 and 2500 Grits
Classic, Eco-Sport, Endeavour, Fiesta, Figo, Ikon
|Model Manufacturing Year|
2010 & Before, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
How to use (DETAILED INSTRUCTIONS):
CHECK COLOUR : Before using, compare color of the paint with the finish on your car / surface by spraying Com-Paint on a remote area, say ...... on Car door sill. Once it looks okay, then only proceed or else, speak to us.
PREPARE SURFACE : Wash scratched area, remove any loose rust, old paint, dirt, wax polish etc. and dry the area thoroughly. Before spray paint application, it is important that you mask the area of your car which is to be refinished. The use of masking tape with even newspaper will help prevent over spray from reaching ......the other areas of the car.
For small and minor scratches : Wet emery pad EP - 2500 and the scratched surface. Gently rub back and forth on the scratch and across by applying a little even pressure of hand. Repeat until most of the scratch disappears. The area will become smooth and dull. When the surface area looks uniform, wipe dry with a clean cloth and now, it is ready for use of Com-Paint spray.
For Deep Scratches & Stone Chips :In case of exposed metal surface or deep scratches, use Com-Fill paste to fill the scratch. Apply light coats with the help of metal applicator to spread evenly for a uniform fill of the scratch and level other surface imperfection. Immediately scrap off the excess with the metal applicator to level the surface and let it dry for 30 minutes.
Wet emery pad EP - 400 and the filled surface, gently rub by applying uniform pressure to level the area to be touched up with the adjoining surface. Wipe dry with a clean cloth and the area is ready for paint spray application.
SHAKE Com-Paint CAN VIGOROUSLY UNTIL AGITATOR BALL MOVES FREELY. Hold Can straight 25 cms ( 12” ) from the surface. SPRAY IN STROKING MOTION TO AVOID DRIPPING. Apply light coats rather a heavy one which might make paint to sag & run. Wait for 5 minutes between coats.
Wait for 10 minutes for the Paint to dry which would become dull (Matt).
Shake the Com-Merge - Finishing Solvent Can and spray on the painted area taking a wider periphery of the touched up area in order to let the paint overspray re-dissolve and merge with the surrounding surface.
Let the touched up area dry for 24 hrs. for full curing of the paint film.
The next day you will notice the surface to be rough due to dust settlement.
Option 1 – If the surface is less rough, proceed to STEP 6
Option 2 – If the surface has more dust or roughness on feel, wet emery pad EP 2500 and the car surface and very lightly rub on the painted area.
To give a final finish, apply a small quantity of Com-Cut to the repair area. Take a clean cloth and start with a soft rubbing action to restore shine. Wipe with a clean dry cloth.
CLEAN PAINT SPRAY BUTTON AFTER USE. If spray button clogs, rinse it in thinner and replace.
TIPS FROM COM-PAINT :
Do not use the product if the surface is hot to touch. Only use light pressure on the emery pads to remove excess paint. Excessive pressure may remove the surrounding paint also. Use masking tape only, other typeof tapes say........a cellotape may cause paint damage on removal. Keep emery pads and paint surface heavily wet while sanding.
- Do not use the product if the surface is hot to touch
- Use masking tape only as cello tape can cause paint to be removed
- Do not puncture the can, incinerate or store above 50° C.
- Do not place Can on a radiator, stove, in direct sunlight or near other heat source
- If spray gets into eyes flush with water.
- If swallowed, do not induce vomiting, call physician. Keep out of reach of children.